All Products

Ceiling fans should be at least 2.1 meters from the floor to the blades of the fan. However, if you have ceilings above 3 meters, you may require an extension rod. Note: Image is a generic extension rod

Want an easy and affordable way to upgrade your Calibo ceiling fan? This wall controller works through RF (radio frequency), doesn’t require a neutral wire and is powered by 2* 12V/23A batteries, which are included. It is compatible with smart and remote controls featuring six-speed settings, 1,4, and 8-hour timer with a light indicator, dimmable light control and three pre-set colour temperatures warm white, cool white, and neutral white). The button under the cover gives you access to summer/winter mode for year-round use, while the isolation switch allows you to turn the light on/off more easily. It’s super easy to use, with simple buttons and a clear display. Plus, it works with popular Calibo models like the Cloudfan, Vanga, Clayfield, and Condor . It’s a great way to make your fans even better without spending a fortune.

Ceiling fans should be at least 2.1 meters from the floor to the blades of the fan. However, if you have ceilings above 3 meters, you may require an extension rod. Note: Image is a generic extension rod

Calibo Angled/Raked Ceiling Kit (38 Degree) – White This kit is designed exclusively for specific Calibo ceiling fans featuring a 26mm downrod, with the ability to accommodate angled ceilings up to 38°. It is suitable for fans designed for flat ceilings that require a steeper sloped ceiling angle than the recommended. Additionally, the kit is also available in Black colour. Exclusively engineered for specific Airborne/Calibo ceiling fans, including: Storm Enviro Cloudfan Alula Condor Vanga Note: Recommended to consult with your electrician if this kit is necessary before purchasing.

Calibo Angled/Raked Ceiling Kit (38 Degree) – Black This kit is expertly designed for Calibo ceiling fans that feature a 26mm downrod. It is capable of accommodating angled ceilings up to 38°. This kit is a perfect fit for fans that require a more pronounced sloped ceiling angle than the recommended settings or those that are exclusively designed for flat ceilings. Additionally, this kit is available in a stylish White colour. Exclusively engineered for specific Airborne/Calibo ceiling fans including: Storm Enviro Cloudfan Alula Condor Vanga Note: Recommended to consult with your electrician if this kit is necessary before purchasing.

Ceiling fans should be at least 2.1 meters from the floor to the blades of the fan. However, if you have ceilings above 3 meters, you may require an extension rod. Note: Image is a generic extension rod

Ceiling fans should be at least 2.1 meters from the floor to the blades of the fan. However, if you have ceilings above 3 meters, you may require an extension rod. Note: Image is a generic extension rod

Ceiling fans should be at least 2.1 meters from the floor to the blades of the fan. However, if you have ceilings above 3 meters, you may require an extension rod.

90cm rod compatible with Calibo Storm and Turaco fans.

90cm rod compatible with Calibo Storm and Turaco fans

Length: 90cm Colour: Black This black extension rod by Calibo is designed to suit the Alula ceiling fan(s). Extension rods are often used on higher than average ceilings so that the ceiling fan blades can sit lower, therefore optimising the airflow impact. The extension rod replaces the smaller rod provided with the ceiling fan. This extension rod can be cut to your desired length.

Any ceiling fan should be at least 2.1 metres from the floor to the blades of the fan. If you have ceilings above 3 metres, you may require an extension rod.

The CCT LED Light kit suitable for the Calibo Alula DC Ceiling fan ONLY . The colour temperature can be controlled via the LED panel before installation to 3000K, 4000K, or 6000K and is dimmable by the supplied remote. Note: This listing is for the Light Kit ONLY

Length: 180cm Colour: White This extension rod by Calibo is designed to suit the Alula ceiling fan(s). Extension rods are often used on higher than average ceilings so that the ceiling fan blades can sit lower, therefore optimising the airflow impact. This white rod replaces the smaller rod provided with the ceiling fan. This extension rod can be cut to your desired length.

Length: 90cm Colour: White This white extension rod by Calibo is designed to suit the Alula ceiling fan(s). Extension rods are often used on higher than average ceilings so that the ceiling fan blades can sit lower, therefore optimising the airflow impact. The extension rod replaces the smaller rod provided with the ceiling fan. This extension rod can be cut to your desired length.

Any ceiling fan should be at least 2.1 metres from the floor to the blades of the fan. If you have ceilings above 3 metres, you may require an extension rod.

The CCT LED Light kit suitable for the Calibo Alula DC Ceiling fan ONLY . The colour temperature can be controlled via the LED panel before installation to 3000K, 4000K, or 6000K and is dimmable by the supplied remote. Note: This listing is for the Light Kit ONLY

Length: 180cm Colour: Black This extension rod by Calibo is designed to suit the Alula ceiling fan(s). Extension rods are often used on higher than average ceilings so that the ceiling fan blades can sit lower, therefore optimising the airflow impact. This black extension rod replaces the smaller rod provided with the ceiling fan. This extension rod can be cut to your desired length.

Compatibility: Suits CloudFan 48″, 52″, 60″ & 72″.

Compatibility: Suits CloudFan 48″, 52″, 60″ & 72″.

Compatibility: Suits CloudFan 48″, 52″, 60″ & 72″.